[Dxspider-support] Node connect request

[Howard Leadmon]

 Always happy to give you, or anyone that desires a connection to the
WB3FFV-2 node, available via both IPv4 and IPv6 as the address of 
DXC.LEADMON.NET on port 7300.  For any that desire to connect, just drop me
an email so you can be set as a node..


---
Howard Leadmon - WB3FFV



> -----Original Message-----
> From: dxspider-support-bounces at dxcluster.org [mailto:dxspider-support-
> bounces at dxcluster.org] On Behalf Of Mike Lewis
> Sent: Thursday, April 05, 2012 4:58 PM
> To: KB1H; The DXSpider Support list
> Subject: Re: [Dxspider-support] Node connect request
> 
> Dick,
> 
> I also need to find a node to connect my node to. It is my understanding
> that in order for this to work properly the node has to configure your
> callsign as a node callsign. So assuming I have kB1H configured as a
> Spider node and you configure my node callsign as a spider node
> (KE0MF-15) then all should be fine - is that right?
> 
> If you are accepting new nodes I would like to see if you would mind
> adding my node to your system. I run a VHF connect only node in the
> Denver/Boulder area in CO and need to find a telnet node to connect to
> for populating my node with spots, WWV, and all of the other incoming
> traffic.
> 
> Mike L.
> KE0MF
> KE0MF-15 (node call, Spider)
> mlewis at digitalglobe.com
> 
> 
> -----Original Message-----
> From: dxspider-support-bounces at dxcluster.org
> [mailto:dxspider-support-bounces at dxcluster.org] On Behalf Of KB1H
> Sent: Wednesday, March 14, 2012 7:42 PM
> To: The DXSpider Support list
> Subject: Re: [Dxspider-support] Node connect request
> 
> DXC.KB1H.COM 7300 is open
> 
> 73 Dick
> 
> Visit "The Barnstormers Contest Group - NZ1U"
> website http://www.qsl.net/kb1h/
> 
> 24/7 Webcam Link on the website
> 
> Email KB1H at arrl.net   YCCC----> http://www.yccc.org/
> 
> KB1H DXSpider Node ------>  dxc.kb1h.com port 7300
> 2 Meter access on 144.930 Mhz.
> 
> NZ1U-3 Skimmer -----> dxc.kb1h.com  port 7303
> 
> N1WK 6M Skimmer ----> dxc.kb1h.com 7304
> ----- Original Message -----
> From: "Jason R Begley" <jayray at digitalgoat.com>
> To: <dxspider-support at dxcluster.org>
> Sent: Wednesday, March 14, 2012 4:21 PM
> Subject: [Dxspider-support] Node connect request
> 
> 
> > I'm looking for 2 more node connections for failover. Is there
> anything
> > special I need to do on my end other than just setting up a new node?
> My
> > node call is KY9J-2
> > Thanks & 73
> > KY9J
> > Jason
> >
> > _______________________________________________
> > Dxspider-support mailing list
> > Dxspider-support at dxcluster.org
> > http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> 
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> 
> This electronic communication and any attachments may contain confidential
> and proprietary
> information of DigitalGlobe, Inc. If you are not the intended recipient,
or an
> agent or employee
> responsible for delivering this communication to the intended recipient,
or if
> you have received
> this communication in error, please do not print, copy, retransmit,
> disseminate or
> otherwise use the information. Please indicate to the sender that you have
> received this
> communication in error, and delete the copy you received. DigitalGlobe
> reserves the
> right to monitor any electronic communication sent or received by its
> employees, agents
> or representatives.
> 
> 
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support