[Dxspider-support] Node connect question

[Phil-W6PK]

I am encountering the following problem with the setup of w6pk-1 (new
node). Even though I am successfully connected to WB3FFV-2 and can see DX
reported from WB3FFV-2 the cluster.pl screen, I cannot see DX on
console.plor other connected nodes. Sho/DX does not show anything. Any
ideas of what
settings I missed?

I have done the following:
set/spider wb3ffv-2
connect WB3FFV-2
accept/route node_default call w6pk

73 de Phil, W6PK


On Thu, Apr 5, 2012 at 2:04 PM, Howard Leadmon <howard at leadmon.net> wrote:

>  Always happy to give you, or anyone that desires a connection to the
> WB3FFV-2 node, available via both IPv4 and IPv6 as the address of
> DXC.LEADMON.NET on port 7300.  For any that desire to connect, just drop
> me
> an email so you can be set as a node..
>
>
> ---
> Howard Leadmon - WB3FFV
>
>
>
> > -----Original Message-----
> > From: dxspider-support-bounces at dxcluster.org [mailto:dxspider-support-
> > bounces at dxcluster.org] On Behalf Of Mike Lewis
> > Sent: Thursday, April 05, 2012 4:58 PM
> > To: KB1H; The DXSpider Support list
> > Subject: Re: [Dxspider-support] Node connect request
> >
> > Dick,
> >
> > I also need to find a node to connect my node to. It is my understanding
> > that in order for this to work properly the node has to configure your
> > callsign as a node callsign. So assuming I have kB1H configured as a
> > Spider node and you configure my node callsign as a spider node
> > (KE0MF-15) then all should be fine - is that right?
> >
> > If you are accepting new nodes I would like to see if you would mind
> > adding my node to your system. I run a VHF connect only node in the
> > Denver/Boulder area in CO and need to find a telnet node to connect to
> > for populating my node with spots, WWV, and all of the other incoming
> > traffic.
> >
> > Mike L.
> > KE0MF
> > KE0MF-15 (node call, Spider)
> > mlewis at digitalglobe.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20130125/6e09ccaa/attachment.html>