[Dxspider-support] Node connect question

[Howard Leadmon]

That is most likely due to the fact, that you didn't contact me first and
tell me you wanted to connect your node to mine.   As stated I am more than
happy to offer any legit ham that desires it, as it's running on a very
beefy server, but you do have to at least let me know you desire a
connection.

 

After seeing your message, I have set W6PK-1 as a Spider type node, and you
should now be able to connect and receive information..

 

73's.

 

 

---

Howard Leadmon - WB3FFV <mailto:howard at leadmon.net> 

 

From: dxspider-support-bounces at dxcluster.org
[mailto:dxspider-support-bounces at dxcluster.org] On Behalf Of Phil-W6PK
Sent: Friday, January 25, 2013 11:53 AM
To: The DXSpider Support list
Subject: Re: [Dxspider-support] Node connect question

 

I am encountering the following problem with the setup of w6pk-1 (new node).
Even though I am successfully connected to WB3FFV-2 and can see DX reported
from WB3FFV-2 the cluster.pl screen, I cannot see DX on console.pl or other
connected nodes. Sho/DX does not show anything. Any ideas of what settings I
missed?

I have done the following:
set/spider wb3ffv-2
connect WB3FFV-2
accept/route node_default call w6pk



73 de Phil, W6PK

 

On Thu, Apr 5, 2012 at 2:04 PM, Howard Leadmon <howard at leadmon.net> wrote:

 Always happy to give you, or anyone that desires a connection to the
WB3FFV-2 node, available via both IPv4 and IPv6 as the address of
DXC.LEADMON.NET on port 7300.  For any that desire to connect, just drop me
an email so you can be set as a node..


---
Howard Leadmon - WB3FFV




> -----Original Message-----
> From: dxspider-support-bounces at dxcluster.org [mailto:dxspider-support-

> bounces at dxcluster.org] On Behalf Of Mike Lewis
> Sent: Thursday, April 05, 2012 4:58 PM
> To: KB1H; The DXSpider Support list
> Subject: Re: [Dxspider-support] Node connect request
>
> Dick,
>
> I also need to find a node to connect my node to. It is my understanding
> that in order for this to work properly the node has to configure your
> callsign as a node callsign. So assuming I have kB1H configured as a
> Spider node and you configure my node callsign as a spider node
> (KE0MF-15) then all should be fine - is that right?
>
> If you are accepting new nodes I would like to see if you would mind
> adding my node to your system. I run a VHF connect only node in the
> Denver/Boulder area in CO and need to find a telnet node to connect to
> for populating my node with spots, WWV, and all of the other incoming
> traffic.
>
> Mike L.
> KE0MF
> KE0MF-15 (node call, Spider)
> mlewis at digitalglobe.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20130125/d488109c/attachment.html>