[Dxspider-support] Partner Link Request

[Stephen Atkins]

That worked.  I had the connect line in the wrong spot.  Just couldn't 
see it until you sent me that.

Thanks.

Stephen

On 2018-11-06 1:57 p.m., Dirk Koopman via Dxspider-support wrote:
> timeout 60
> connect telnet dxc.wb3ffv.us 7300
> 'login' 'VE6CIC-1'
> 
> 
> I won't bother with the abort line, those are the defaults.
> 
> 73 Dirk G1TLH
> 
> On 06/11/2018 20:35, Stephen Atkins via Dxspider-support wrote:
>> Thanks for setting this up.  Having a bit of a problem connecting.  I 
>> can manually connect using telnet to port 7300 but when I setup the 
>> connection script:
>>
>> timeout 60
>> abort (Busy|Sorry|Fail)
>> 'login' 'VE6CIC-1'
>> connect telnet dxc.wb3ffv.us 7300
>>
>> It just times out.  Not sure if I'm doing something wrong or not.
>>
>> Stephen
>>
>> On 2018-11-06 11:47 a.m., Howard Leadmon wrote:
>>>    You are now configured as a DXspider node, let me know if you have 
>>> any problems..
>>>
>>> VE6CIC-1 set as DXSpider style Node
>>> WB3FFV-2  6-Nov-2018 1846Z dxspider >
>>>
>>>
>>> 73's de WB3FFV
>>>
>>> ---
>>> Howard Leadmon - howard at leadmon.net
>>> PBW Communications, LLC
>>> http://www.pbwcomm.com
>>>
>>> On 11/6/2018 1:38 PM, Stephen Atkins wrote:
>>>> Thanks. My info is:
>>>>
>>>> ve6cic-1 at dxc.thebitbucket.ca port 7300
>>>>
>>>> Stephen
>>>>
>>>> On 2018-11-06 11:27 a.m., Howard Leadmon wrote:
>>>>>    If you can connect with the *WB3FFV-2* hub node, I am happy to 
>>>>> set your node ID as a Spider node..
>>>>>
>>>>>   Try connecting with *dxc.wb3ffv.us* on *port 7300*..
>>>>>
>>>>> 73's..
>>>>>
>>>>> ---
>>>>> Howard Leadmon -howard at leadmon.net
>>>>> PBW Communications, LLC
>>>>> http://www.pbwcomm.com
>>>>>
>>>>> On 11/6/2018 11:26 AM, Stephen Atkins via Dxspider-support wrote:
>>>>>> Hello everyone.  I just got my DXSpider cluster software installed 
>>>>>> on my Raspberry Pi after many years of being away.  I was hoping 
>>>>>> someone out there would let me partner with them.  I still need to 
>>>>>> configure my router (which is not behaving like it should) to 
>>>>>> forward telnet and port 7300 but should have that done tonight.
>>>>>>
>>>>>> Thanks
>>>>>> Stephen Atkins
>>>>>> VE6CPU, VE6CIC, VE6SU
>>>>>>
>>>>>> _______________________________________________
>>>>>> Dxspider-support mailing list
>>>>>> Dxspider-support at tobit.co.uk
>>>>>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>>>>>
>>>
>>
>> _______________________________________________
>> Dxspider-support mailing list
>> Dxspider-support at tobit.co.uk
>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> 
> 
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support