[Dxspider-support] SH/DX issue

[Luigi Carlotto IK5ZUK]

Hi Tom,
Thanks for your help: I've modified the /spider/data/bands.pl, done 
"load/bands" and all is working properly !

Hope this will not makes updates more difficult than they need to be...

73 Luigi IK5ZUK


Il 18/02/2021 13:12, wb8zrl--- via Dxspider-support ha scritto:
> In my version of spider you must make the change in /spider/data/bands.pl
>
>
> tom    wb8zrl
>
>
> On Thu, February 18, 2021 2:41 am, Luigi Carlotto IK5ZUK via 
> Dxspider-support wrote:
> > Hi Tom and Joe,
> > Thanks for the point.
> >
> > I need to modify the bands.pl file, so I've copied the original one into
> > my /spider/local_data folder and modified as required; done a
> > "load/bands" command as sysop, but nothing is changed. Do I need to
> > modify directly the bands.pl file located into the /spider/data folder ?
> >
> > 73 Luigi IK5ZUK
> >
> >
> > Il 18/02/2021 01:06, JOSEPH REED via Dxspider-support ha scritto:
> >> You are correct Tom,
> >>
> >> I have a current Spider release and /spider/data/bands.pl has 
> whitespace
> >> where it should be defined. Good eyes.
> >>
> >> Joe N9JR
> >>
> >>> On Feb 17, 2021, at 5:52 PM, wb8zrl--- via Dxspider-support
> >>> <dxspider-support at tobit.co.uk> wrote:
> >>>
> >>> I have an older version of spider, but bands.pl, where the 
> subbands are
> >>> identified, has no data subband on 160M
> >>>
> >>> tom wb8zrl
> >>>
> >>>
> >>> On Wed, February 17, 2021 1:02 pm, Luigi Carlotto IK5ZUK via
> >>> Dxspider-support wrote:
> >>>> Hello all,
> >>>>
> >>>> doing the command "sh/dx on 20m/data" I'm receiving from spider the
> >>>> properly output as expected (the same with the other HF bands), but
> >>>> when
> >>>> I do the same command for the 160m band ("sh/dx on 160m/data"), I
> >>>> receive the following error message:
> >>>>
> >>>> sh/dx parse error 'range' Invalid freq 160m/data need: eg 0/30000 or
> >>>> hf
> >>>> or hf/cw is not a range (eg 0/30000)
> >>>>
> >>>> Do I missed something ? Dirk, please tell me something...
> >>>>
> >>>> Here running Spider ver. 1.57 build 338.
> >>>>
> >>>> 73 Luigi IK5ZUK
> >>>>
> >>>> --
> >>>> Questa email è stata esaminata alla ricerca di virus da AVG.
> >>>> http://www.avg.com
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> Dxspider-support mailing list
> >>>> Dxspider-support at tobit.co.uk
> >>>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> >>>> _______________________________________________
> >>> Dxspider-support mailing list
> >>> Dxspider-support at tobit.co.uk
> >>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> >>
> >> _______________________________________________
> >> Dxspider-support mailing list
> >> Dxspider-support at tobit.co.uk
> >> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> >
> >
> > _______________________________________________
> > Dxspider-support mailing list
> > Dxspider-support at tobit.co.uk
> > https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> >
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support



-- 
Questa email è stata esaminata alla ricerca di virus da AVG.
http://www.avg.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20210218/46ed86c8/attachment.htm>