[Dxspider-support] DXSpider V1.55 build 0.216

JOSEPH REED joe at n9jr.com
Tue Nov 30 01:45:57 GMT 2021


Hi Mike,

Did your friend execute git —reset hard before issuing a git pull?

I also have a headless rpi4 so I ssh in as “pi”, execute a sudo su - sysop to switch user context to the sysop user, cd /spider; git —reset hard; git pull followed by a sudo reboot.  Never have had a problem.

With the price of USB 3.1 SSD drives so cheap I’d ditch the SD10 card and go USB, much better I/O performance and increased reliability.  I have one I am testing with 64 bit Debian 10 on the Raspberry PI.  You create a UEFI partition and use Rufus to upload the installation image and the ethernet driver (not currently AFAIK supported). Since it started as  a beta Debian 10 release I am monitoring it for updates and nonsuch.  Would love to get off of the 32 bit rpi stuff and have access to the full repository.

YMMV,

73,
Joe N9JR



> On Nov 29, 2021, at 7:05 PM, Michael Walker via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
> 
> Hi All
> 
> I updated the PI via GIT PULL and that looks like it worked (I guess - my GIT experience is limited ).
> 
> Is it required that I reboot as I am sitting on this wonderful Uptime of 505 days.   
> 
> And, I am still at v1.55 build 0.216.  I had another friend of mine say he followed the same procedure and rebooted and is still at 1.55 216.  Guidance would be appreciated.
> 
> BTW, for those that asked, it is a RPI4 with a good quality SD Card.  I only have the Raspbian build with just a console interface and I do a few updates on it as suggested.  
> 
> To take the load of the SD Card/log files, I run log2ram https://github.com/azlux/log2ram <https://github.com/azlux/log2ram> and then I pretty much never touch it again.  
> 
> Many  73
> 
> Mike va3mw
> 
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20211129/8aa4feab/attachment.htm>


More information about the Dxspider-support mailing list