[Dxspider-support] If you connect with WB3FFV-2 Node..

[Jim Reisert AD1C]

Hi Howard,

Please register WB3FFV-3 here:

https://www.dxcluster.info/telnet/submit.php?node=WB3FFV-2

Change the node callsign and any other pertinent information.  Then submit it.

I can delete WB3FFV-3 (or -2) when you shut it down.

On Sun, Jan 30, 2022 at 9:13 PM Howard Leadmon via Dxspider-support
<dxspider-support at tobit.co.uk> wrote:
>
>   I couldn't think of an easier way to do this, but if your one of the
> many cluster nodes that connect with WB3FFV-2, if at all possible add
> WB3FFV-3 as a spider node as well.
>
>   At the moment the older DXspider is running as -2 as it has been for
> years, and -3 is the newer Mojo node.   I am going to try and swap the
> two, and then change my DNS around for it to point at the new server.
> As always it's possible you will cache old info, and could end up
> connected to -3.   As they carry the same exact same configs, either
> will work fine.   So by having both as nodes, you will be just fine.
>
>   If you run into any issues, as always feel free to contact me and I
> will try and help figure it out..
>
>
> 73's de WB3FFV
>
>
> ---
> Howard Leadmon - howard at leadmon.net
> PBW Communications, LLC
> http://www.pbwcomm.com
>
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support



-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://www.ad1c.us