[Dxspider-support] DXSpider crontab and IP addresses

Keith Maton g6nhu at me.com
Tue Jan 31 15:50:35 GMT 2023


Yes, that was it.  I thought I’d updated it already.  Working now, thanks.

With the new build, show/spotstats always now shows 0% spots promoted.  With the previous build, that was aways around 4-5%.

73 Keith  

> On 31 Jan 2023, at 13:54, Kin <ea3cv at cronux.net> wrote:
> 
> Keith,
>  
> I think you have the first version.
> Download the latest one. I just ran it and it went from 493 to 494 with reboot in 3 seconds.
>  
> https://www.dropbox.com/s/q61tq9ywfc12ax1/check_build.pl?dl=0
>  
> Kin
>  
> De: Dxspider-support <dxspider-support-bounces at tobit.co.uk> En nombre de Keith Maton via Dxspider-support
> Enviado el: martes, 31 de enero de 2023 14:41
> Para: The DXSpider Support list <dxspider-support at tobit.co.uk>
> CC: Keith Maton <g6nhu at me.com>
> Asunto: Re: [Dxspider-support] DXSpider crontab and IP addresses
>  
> Thank you Dirk, this is a really good addition, thank you so much.
>  
> @Kin..  When I run a check_build, it doesn’t find it:
>  
> check_build
> Your build: 4dcd43a5
> New build:  4dcd43a5
> There is no new build.
> 
> 
> On 31 Jan 2023, at 12:57, Dirk Koopman via Dxspider-support <dxspider-support at tobit.co.uk <mailto:dxspider-support at tobit.co.uk>> wrote:
>  
> There is a new update available.
> 
> Amongst other things it allows crontab to specify whether you want to operate in UTC (the current default) or to change it to using your local time zone. You do this by adding the following line into your local crontab:
> 
> LOCALE = LOCAL
> 
> or
> 
> LOCALE=UTC
> 
> Please note that this setting applies to ALL your cron times (including the DXSpider system defined ones). This doesn't bother me if you're not bothered either :-)
> 
> (Most of) the uninitialized variable warnings should have been removed. 
> 
> Please read the Changes file. 
> 
> If you would like to partake in the PC92 A/D reduction experiment then, by all means, 'set/var $DXProt::pc92_ad_enable 0'
> 
> DO NOT 'set/var $DXProt::pc92c_ipaddr_enable 1' at this time. I don't mind, but CC Cluster sysops might. 
> 
> 73 Dirk G1TLH
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk <mailto:Dxspider-support at tobit.co.uk>
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20230131/584ccab3/attachment.htm>


More information about the Dxspider-support mailing list