[Dxspider-support] DXSpider crontab and IP addresses

[Keith Maton]

OK, has that changed?  Because with the previous build, as soon as it restarted, I’d start seeing that number increase slowly but it’s still at 0% after a few hours.  My position in the topology hasn’t changed so I’m just checking in case it’s not doing what it’s supposed to.



> On 31 Jan 2023, at 15:57, Dirk Koopman via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
> 
> You have to wait a few hours before you get any meaningful stats. Also it depends where you are in the cluster topology and who else around you has updated (or not). A lot of major nodes have updated fairly recently. The goal is not so much the number of upgrades that you do, but more the pc11 / (pc11 + pc61) ratio. Which, I'm glad to see is slowly drifting down from 18+% to 16% and below. 
> 
> Dirk
> 
> On 31/01/2023 15:50, Keith Maton via Dxspider-support wrote:
>> Yes, that was it.  I thought I’d updated it already.  Working now, thanks.
>> 
>> With the new build, show/spotstats always now shows 0% spots promoted.  With the previous build, that was aways around 4-5%.
>> 
>> 73 Keith  
>> 
>>> On 31 Jan 2023, at 13:54, Kin <ea3cv at cronux.net> <mailto:ea3cv at cronux.net> wrote:
>>> 
>>> Keith,
>>>  
>>> I think you have the first version.
>>> Download the latest one. I just ran it and it went from 493 to 494 with reboot in 3 seconds.
>>>  
>>> https://www.dropbox.com/s/q61tq9ywfc12ax1/check_build.pl?dl=0
>>>  
>>> Kin
>>>  
>>> De: Dxspider-support <dxspider-support-bounces at tobit.co.uk> <mailto:dxspider-support-bounces at tobit.co.uk> En nombre de Keith Maton via Dxspider-support
>>> Enviado el: martes, 31 de enero de 2023 14:41
>>> Para: The DXSpider Support list <dxspider-support at tobit.co.uk> <mailto:dxspider-support at tobit.co.uk>
>>> CC: Keith Maton <g6nhu at me.com> <mailto:g6nhu at me.com>
>>> Asunto: Re: [Dxspider-support] DXSpider crontab and IP addresses
>>>  
>>> Thank you Dirk, this is a really good addition, thank you so much.
>>>  
>>> @Kin..  When I run a check_build, it doesn’t find it:
>>>  
>>> check_build
>>> Your build: 4dcd43a5
>>> New build:  4dcd43a5
>>> There is no new build.
>>> 
>>> 
>>> On 31 Jan 2023, at 12:57, Dirk Koopman via Dxspider-support <dxspider-support at tobit.co.uk <mailto:dxspider-support at tobit.co.uk>> wrote:
>>>  
>>> There is a new update available.
>>> 
>>> Amongst other things it allows crontab to specify whether you want to operate in UTC (the current default) or to change it to using your local time zone. You do this by adding the following line into your local crontab:
>>> 
>>> LOCALE = LOCAL
>>> 
>>> or
>>> 
>>> LOCALE=UTC
>>> 
>>> Please note that this setting applies to ALL your cron times (including the DXSpider system defined ones). This doesn't bother me if you're not bothered either :-)
>>> 
>>> (Most of) the uninitialized variable warnings should have been removed. 
>>> 
>>> Please read the Changes file. 
>>> 
>>> If you would like to partake in the PC92 A/D reduction experiment then, by all means, 'set/var $DXProt::pc92_ad_enable 0'
>>> 
>>> DO NOT 'set/var $DXProt::pc92c_ipaddr_enable 1' at this time. I don't mind, but CC Cluster sysops might. 
>>> 
>>> 73 Dirk G1TLH
>>> _______________________________________________
>>> Dxspider-support mailing list
>>> Dxspider-support at tobit.co.uk <mailto:Dxspider-support at tobit.co.uk>
>>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>> 
>> 
>> 
>> _______________________________________________
>> Dxspider-support mailing list
>> Dxspider-support at tobit.co.uk <mailto:Dxspider-support at tobit.co.uk>
>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> 
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20230131/86c21881/attachment.htm>