[Dxspider-support] Blocking callsigns from being shown as spots?

[Keith Maton]

Thank you Martin, if that works for you then it should be correct

I’ll need to run it for a while to be sure but I’m now quite confident.

Using that same logic, this should also work: rej/spot node_default input by d0,d1 (with an appropriate slot number).

I will report back in due course.

73 Keith



> On 2 Feb 2024, at 21:29, Martin Davies G0HDB via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
> 
> On 2 Feb 2024 at 20:44, Keith Maton via Dxspider-support wrote:
> 
>> Nope, this doesn´t work.  I have the following set
>> 
>> sh/filter node_default
>> node_default : spots input
>> filter 3 reject call {^d[01]}
>> 
>> But spots of D0 and D1 are still showing.
> 
> Keith:
> 
> I've just checked the node_default spots input filter that I've got set on GB7DXC-5 and it 
> appears to be:
> 
> reject/spot node_default input call d0,d1
> 
> This seems to work because when I do a 'sh/dx d0' or a 'sh/dx d1' command on the node I 
> get a 'Not found' response.
> 
> HTH,
> 
> -- 
> Martin G0HDB--
> 73, Martin G0HDB
> 
> 
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20240202/27acfec0/attachment.htm>