[Dxspider-support] Blocking callsigns from being shown as spots?

[Keith Maton]

For completeness, this has worked.

The final two commands I used were:

rej/spot node_default input 0 call d0,d1
rej/spot node_default input 1 by d0,d1

73 Keith



> On 2 Feb 2024, at 21:48, Keith Maton via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
> 
> Thank you Martin, if that works for you then it should be correct
> 
> I’ll need to run it for a while to be sure but I’m now quite confident.
> 
> Using that same logic, this should also work: rej/spot node_default input by d0,d1 (with an appropriate slot number).
> 
> I will report back in due course.
> 
> 73 Keith
> 
> 
> 
>> On 2 Feb 2024, at 21:29, Martin Davies G0HDB via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
>> 
>> On 2 Feb 2024 at 20:44, Keith Maton via Dxspider-support wrote:
>> 
>>> Nope, this doesn´t work.  I have the following set
>>> 
>>> sh/filter node_default
>>> node_default : spots input
>>> filter 3 reject call {^d[01]}
>>> 
>>> But spots of D0 and D1 are still showing.
>> 
>> Keith:
>> 
>> I've just checked the node_default spots input filter that I've got set on GB7DXC-5 and it 
>> appears to be:
>> 
>> reject/spot node_default input call d0,d1
>> 
>> This seems to work because when I do a 'sh/dx d0' or a 'sh/dx d1' command on the node I 
>> get a 'Not found' response.
>> 
>> HTH,
>> 
>> -- 
>> Martin G0HDB--
>> 73, Martin G0HDB
>> 
>> 
>> _______________________________________________
>> Dxspider-support mailing list
>> Dxspider-support at tobit.co.uk
>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> 
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20240205/f0d466ba/attachment.htm>