[Dxspider-support] MRTG users going blank

[Keith Maton]

Answering myself again as I’ve got one step further.

In /spider/mrtg/mrtg/cfg there’s the following line.

MaxBytes[users]: 500

I changed that to 1000

But when ‘mrtg all’ runs via crontab, it changes back to 500.

This is clearly the user limit, how can I change this so that it persists?

Thanks,

73 Keith

> On 30 Oct 2024, at 07:12, Keith Maton via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
> 
> This does seem to be when the number of users connected goes above 500, I can see that last night when it dropped below that number, the graph started populating again. 
> 
> Is there anything I can change within MRTG that will fix this please?
> 
> 73 Keith
> —
> 
> 
>> On 29 Oct 2024, at 12:03, Keith Maton via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
>> 
>> Hi all,
>> 
>> I noticed at the weekend that my MRTG user graph was blank, I restarted the node and it came back.  Yesterday, it had dropped to 0 again and I did a full reboot of the host.
>> 
>> Now it’s happened again.
>> 
>> Has anyone experienced this?
>> 
>> I have a gut feeling it’s when there are 500 users on the node but I’m not 100% sure.  
>> 
>> 
>> http://g6nhu.getmyip.com:1090/dump1090-fa/mrtg/users.html
>> 
>> 
>> 73 Keith
>> 
>> <graph Medium.jpeg>
>> _______________________________________________
>> Dxspider-support mailing list
>> Dxspider-support at tobit.co.uk <mailto:Dxspider-support at tobit.co.uk>
>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk <mailto:Dxspider-support at tobit.co.uk>
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20241030/1adfa94f/attachment.htm>