[Dxspider-support] MRTG users going blank

[Keith Maton]

Sorted.

I coped /spider/cmd/mrtg.pl to /spider/local_cmd/, edited it and changed 

$mc->cfgprint('users', [qw(unknaszero gauge integer)], 500,

To

$mc->cfgprint('users', [qw(unknaszero gauge integer)], 1000,

Ran load/cmd from the console and now /spider/mrtg/mrtg.cfg shows 1000 and the graph is working correctly again.

Perhaps this limit can be increased in the next version please Dirk?

73 Keith




> On 30 Oct 2024, at 08:40, Keith Maton via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
> 
> Answering myself again as I’ve got one step further.
> 
> In /spider/mrtg/mrtg.cfg there’s the following line.
> 
> MaxBytes[users]: 500
> 
> I changed that to 1000
> 
> But when ‘mrtg all’ runs via crontab, it changes back to 500.
> 
> This is clearly the user limit, how can I change this so that it persists?
> 
> Thanks,
> 
> 73 Keith
> 
>> On 30 Oct 2024, at 07:12, Keith Maton via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
>> 
>> This does seem to be when the number of users connected goes above 500, I can see that last night when it dropped below that number, the graph started populating again. 
>> 
>> Is there anything I can change within MRTG that will fix this please?
>> 
>> 73 Keith
>> —
>> 
>> 
>>> On 29 Oct 2024, at 12:03, Keith Maton via Dxspider-support <dxspider-support at tobit.co.uk> wrote:
>>> 
>>> Hi all,
>>> 
>>> I noticed at the weekend that my MRTG user graph was blank, I restarted the node and it came back.  Yesterday, it had dropped to 0 again and I did a full reboot of the host.
>>> 
>>> Now it’s happened again.
>>> 
>>> Has anyone experienced this?
>>> 
>>> I have a gut feeling it’s when there are 500 users on the node but I’m not 100% sure.  
>>> 
>>> 
>>> http://g6nhu.getmyip.com:1090/dump1090-fa/mrtg/users.html
>>> 
>>> 
>>> 73 Keith
>>> 
>>> <graph Medium.jpeg>
>>> _______________________________________________
>>> Dxspider-support mailing list
>>> Dxspider-support at tobit.co.uk <mailto:Dxspider-support at tobit.co.uk>
>>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>> _______________________________________________
>> Dxspider-support mailing list
>> Dxspider-support at tobit.co.uk <mailto:Dxspider-support at tobit.co.uk>
>> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
> 
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20241030/59860901/attachment.htm>