[Dxspider-support] Bads IPs address ???

[Kin]

Hi,
 
There are several spider nodes with this type of configuration: one IP to the "traditional" WAN and another IPv4 to the AMPRNET network.
 
Kin EA3CV
 
 
De: Dxspider-support <dxspider-support-bounces at tobit.co.uk> En nombre de djk via Dxspider-support
Enviado el: domingo, 23 de marzo de 2025 22:53
Para: dxspider-support at tobit.co.uk
CC: djk <djk at tobit.co.uk>
Asunto: Re: [Dxspider-support] Bads IPs address ???
 
So are you saying you have two live 'node' interfaces? Because, if you have, I am developing an IPV4 solution that should work automagically. As far as I can tell this is an masquerading  IPV4 only problem. IPV6, that has access to the internet, just seems to work.
Dirk
On 23/03/2025 21:13, Kin via Dxspider-support wrote:
Boudewijn,
 
$main::localhost_alias_ipv4 will not work as you want, it only accepts one value, it is not an array like in the case of @main::localhost_names
 
Kin EA3CV
 
De: Dxspider-support  <mailto:dxspider-support-bounces at tobit.co.uk> <dxspider-support-bounces at tobit.co.uk> En nombre de Boudewijn (Bob) Tenty via Dxspider-support
Enviado el: domingo, 23 de marzo de 2025 22:03
Para: Ken Sharman via Dxspider-support  <mailto:dxspider-support at tobit.co.uk> <dxspider-support at tobit.co.uk>
CC: Boudewijn (Bob) Tenty  <mailto:bob at tenty.ca> <bob at tenty.ca>
Asunto: Re: [Dxspider-support] Bads IPs address ???
 
Hi Ken,
The question is that I have to enter both IPv4 addresses, maybe I wasn't clear about it. Maybe something like,
 set/var $main::localhost_alias_ipv4 (12.123.123.123  44.135.85.151)   
as they do with local addresses. Anyhow, I will just try it and find out :-)
Boudewijn VE3TOK
On 3/23/25 14:37, Ken Sharman via Dxspider-support wrote:
Should be a space after ipv4 
 
Ken
 
On 23 Mar 2025 18:35, Ken Sharman  <mailto:kenny at g7vja.co.uk> <kenny at g7vja.co.uk> wrote:
Hi Boudewijn 
Enter it like so with your own ip
 set/var $main::localhost_alias_ipv4 '12.123.123.123'
 
Ken G7VJA
GB7HTL
 
On 23 Mar 2025 18:05, "Boudewijn (Bob) Tenty via Dxspider-support"  <mailto:dxspider-support at tobit.co.uk> <dxspider-support at tobit.co.uk> wrote:
I use my commercial IPv4 address or my amprnet IPv4 address depending on the situation and both are always reachable.
How do I specify that in the following IPv4 example line of my startup script?
 set/var $main::localhost_alias_ipv4 '1.2.3.4'
Thanks,
Boudewijn VE3TOK
-- 
There is nothing permanent except change
  
                                 Heraclitus
_______________________________________________
Dxspider-support mailing list
Dxspider-support at tobit.co.uk <mailto:Dxspider-support at tobit.co.uk> 
https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
 
 



_______________________________________________
Dxspider-support mailing list
Dxspider-support at tobit.co.uk <mailto:Dxspider-support at tobit.co.uk> 
https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
-- 
There is nothing permanent except change
 
                                Heraclitus



_______________________________________________
Dxspider-support mailing list
Dxspider-support at tobit.co.uk <mailto:Dxspider-support at tobit.co.uk> 
https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20250324/91adc3b4/attachment-0001.htm>