[Dxspider-support] Maximum number of all variations G1TLH (included ssids, prefixes, suffixes the whole nine yards)

[Kin]

For this reason, I've indicated that the maximum limits for users and nodes
should be different. They can be differentiated by category; otherwise, the
limit would have to be very high if you have more than one node.

Kin

-----Mensaje original-----
De: Dxspider-support <dxspider-support-bounces at tobit.co.uk> En nombre de
Mike McCarthy, W1NR via Dxspider-support
Enviado el: lunes, 24 de marzo de 2025 17:10
Para: djk via Dxspider-support <dxspider-support at tobit.co.uk>
CC: Mike McCarthy, W1NR <lists at w1nr.net>
Asunto: Re: [Dxspider-support] Maximum number of all variations G1TLH
(included ssids, prefixes, suffixes the whole nine yards)

So in my case I have 3 clusters, each with an SSID. One is general DX. 
One is filtered for only NA spots. Another is for testing only. Each of
these has a console callsign with a different SSID. That is 6 total and I
have not even connected my logging software, which uses even more SSID's for
the different software, filtering, RBN's etc.

A hard limit with no override is a big problem for me, especially during a
contests where I am monitoring the clusters with consoles and have multiple
logging and spotting connections.

I could dump the test node which will free up 2.

On 3/24/2025 10:52 AM, djk via Dxspider-support wrote:
> Suggestions for a number please.
> 
> I'm afraid the time has come to limit the number of connections a 
> (base) callsigns can have. A base callsign being G1TLH. Anything 
> attached (e.g
> W/G1TLH/0-4) will be stripped off for this maximum. For a 
> non-normalised callsigns the current limit is 1, locally and 3 across 
> the whole cluster. I would happy to increase this because, unless 
> someone can give me good reasons not to, it will become a HARD limit 
> for the said base callsign and ALL its variations - and not changeable
locally.
> 
> There is too much rubbish and wilful prating about going on and that 
> needs to be stamped out. This limit will apply to both nodes and users.
> 
> 73 Dirk G1TLH
> 
> 
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support

--
73 de Mike, W1NR

THAT was the equation. EXISTENCE!... SURVIVAL... must cancel out... 
programming!

- Ruk -


_______________________________________________
Dxspider-support mailing list
Dxspider-support at tobit.co.uk
https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support