[Dxspider-support] Re: Auto updating Keplerian elements
Jim Reisert AD1C
jjreisert at alum.mit.edu
Thu Aug 11 15:52:53 BST 2005
Thanks, Eric. I'll try this tonight.
--- Eric Carling <eric at g0cgl.f2s.com> wrote:
> Assuming your Spider is running in Perl for Windows as mine is, it may be be
> of some interest that I could not make Jesus' method work and he did confirm
> that it was for Linux systems.
>
> Paul YV1DIG kindly helped me out with the following and I find this works
> perfectly:
>
> "I run the bat file daily as is not a big deal (at 00:00 hours).
>
> Just make a .bat file like this called keps.bat (wich resides on a folder I
> created under /Spider called BAT
> Also i downloaded the wget.exe, and the .dll's in the same folder
>
> Keps.bat source is as following:
>
> C:\spider\bat\wget -nv --output-document=nasa.txt
> http://www.amsat.org/amsat/ftp/keps/current/nasabare.txt
> C:\Perl\bin\perl.exe c:\spider\perl\convkeps.pl -p c:\spider\bat\nasa.txt
> copy c:\spider\bat\nasa.txt c:\spider\packclus\nasa.txt
>
> 1st line is to get the AMSAT keps, but you just can use the source you want
> 2nd line converts the keps to the cluster proper configuration
> 3rd line is to put the file in the "file" area to be used by the users (just
> if you want to)
>
> Then add to the CRONTAB the following :
>
> 5 0 * * * run_cmd('load/keps')
>
> this is to load the keps, and all job is done. I added another line to let
> my users know that file is available and command sh/sat has updated keps:
>
> 6 0 * * * run_cmd('ann Keplerian Elements has been updated, file nasa.txt
> available')
>
> This works fine... hope it helps to you"
>
>
> ----- Original Message -----
> From: "t3" <T3 at semarg.ath.cx>
> To: "The DXSpider Support list" <dxspider-support at dxcluster.org>
> Sent: Wednesday, August 10, 2005 11:55 PM
> Subject: Re: [Dxspider-support] Re: Auto updating Keplerian elements
>
>
> >I seem to be having, almost the same problem
> > i can D-load the keps with the script file, then i here the hard-disk
> > working, im guessing converting the keps over,
> > then crash
> > spider window closes
> >
> > Tony
> > NN1D
> >
> >
> > Jim Reisert AD1C wrote:
> >
> >>More info:
> >>
> >>The old keps.pm was in spider/perl
> >>
> >>The new keps.pm was in spider/local
> >>
> >>I copied the new one to spider/perl and did load/keps again.
> >>
> >>Still no change.
> >>
> >>--- Jim Reisert AD1C <jjreisert at alum.mit.edu> wrote:
> >>
> >>
> >>>I finally got around to Jesus' mail.
> >>>
> >>>I ran the wget and convkeps.pl commands manually, I have a new keps.pm
> >>>file.
> >>>
> >>>I did the load/keps command.
> >>>
> >>>sh/ssat still shows all very OLD elements (older than 1000 days).
> >>>
> >>>I restarted my cluster, same thing.
> >>>
> >>>Did I do something wrong?
> >>>
> >>>Am running on WINDOWS, not Linux
> >>>
> >>>73 - Jim AD1C
> >>>telnet://dxc.ad1c.us
> >>>
> >>
> >>
> >>--
> >>Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
> >>USA +978-251-9933, <jjreisert at alum.mit.edu>, http://www.ad1c.us
> >>
> >>_______________________________________________
> >>Dxspider-support mailing list
> >>Dxspider-support at dxcluster.org
> >>http://www.tobit.co.uk/mailman/listinfo/dxspider-support
> >>
> >>
> >
> > _______________________________________________
> > Dxspider-support mailing list
> > Dxspider-support at dxcluster.org
> > http://www.tobit.co.uk/mailman/listinfo/dxspider-support
> >
>
>
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://www.tobit.co.uk/mailman/listinfo/dxspider-support
>
--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <jjreisert at alum.mit.edu>, http://www.ad1c.us
More information about the Dxspider-support
mailing list