[Dxspider-support] Controlling upstream spots

[Allen]

Thanks Dirk I'll check out filters again.
Had a earlier look at filters but could not see how it would work to 
prevent spots LEAVING the node.

acc/spot node_default <filter spec>

Ok, going in....

cheers

Allen
VK3HRA


On 8/01/2016 11:11 pm, djk wrote:
> On 08/01/16 09:08, Allen wrote:
>> Hi all
>>
>> Looking for advice as to controlling what spots are feed into the
>> DXCluster network.
>>
>> I have a site with multiple upstream feeds. I and others use the site
>> as a feed for logging software and enjoy the spots.
>>
>> I want to post spots to my cluster which are really only for local
>> consumption, not all. So need to be able to allow some spots out but
>> prevent others from going into the cluster system.
>>
>> What would be the best way to approach this ?
>> Happy to research but currently lost for direction.
>>
>
> "help filter"
>
> Or look at the filtering page of http://wiki.dxcluster.org.
>
> But if what you want to do is prevent spots _leaving_ the node, then
> what you need is to fiddle with "acc/spot node_default <filter spec>".
> The filter spec should be something that defines the spots that you want
> allow out. Alternatively you can use "rej/spot node_default <filter
> spec>" whose filter spec targets stuff you don't want to leave.
>
> But I think you are going to have to be much more specific about what
> you want to happen. There isn't enough detail at the moment to be more
> helpful.
>
> Dirk G1TLH
>
>
>
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at dxcluster.org
> http://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>