[Dxspider-support] Missing PC92 packets

[Christopher Schlegel]

Rudy,

PC92 is the routing protocol. For spots you want PC11 and PC61.

https://wiki.dxcluster.org/wiki/DXSpider_PC_Packet_Cluster_Protocol

watchdbg "PC11|PC61" - I think should get you what you want.

Chris, WI3W

On Fri, Apr 4, 2025, 09:27 Rudy Bakalov via Dxspider-support <
dxspider-support at tobit.co.uk> wrote:

> I see packets from other nodes coming in to N2WQ-73 (spider). However,
> none of them are making it to VA3UXA-1 which is my test CCC. If I connect
> it to other nodes, PC92 packets do show up. Why is N2WQ-73 not distributing
> PC92 spots?
>
> Here's what I have in the startup script:
>
> #
> set/var $DXProt::pc9x_time_tolerance = 120
> set/var $DXProt::senderverify = 1
> set/var $DXProt::pc92c_ipaddr_enable = 1
> set/var $DXProt::pc92_ad_enable = 1
> #
>
> In comparison, N2WQ-1 (CCC) is connected to multiple partners, both CCC
> and spiders, and is quite busy handling PC92 packets.
>
> Any ideas?
>
> Rudy N2WQ
>
> _______________________________________________
> Dxspider-support mailing list
> Dxspider-support at tobit.co.uk
> https://mailman.tobit.co.uk/mailman/listinfo/dxspider-support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20250404/12b7c092/attachment.htm>